Skip to content
IMPACT DOORS

Our Services

Garage Doors in Moreton Bay & North Brisbane

Impact Doors supplies, fits and looks after garage doors across Moreton Bay and North Brisbane — sectional panel doors, roller doors and tilt doors. Jarred quotes the job, orders the door and fits it himself, so the person who gives you the price is the person who turns up.

The three door types, and which suits your garage

Nearly every home in the region ends up with one of three doors, and the right one is usually decided by the opening rather than by taste.

Sectional panel doors are the default on anything built from the 1990s onward. They run in horizontal panels up into the roof space, seal well against wind-driven rain, and take a standard sectional opener. They need headroom above the opening and clear space along the ceiling.

Roller doors curl into a drum above the opening, so they suit garages and sheds with little headroom or an awkward lintel. They're the standard fit on farm sheds, acreage workshops and industrial units around Brendale and Narangba, and they're the cheapest of the three to replace.

Tilt doors are a single slab that swings out and up. There are still plenty on 1960s–1980s lowset houses through Clontarf, Margate and Deception Bay. They're simple and repairable, but they swing out over the driveway, which rules them out if you park close to the door.

Finishes and what actually lasts here

Colorbond steel in a factory powder-coat finish is the workhorse and covers most colours people ask for. Timber-look woodgrain finishes on a steel door give you the appearance of cedar without the maintenance, which matters in a climate that alternates between heavy summer storms and hard sun.

On the bayside — Redcliffe, Scarborough, Newport, Clontarf, Margate, Bribie Island and Beachmere — the door skin is rarely the first thing to fail. It's the hardware: spring coils, cable ends, roller spindles and the bearing plates. Specify galvanised hardware from the start on any coastal install and you buy yourself years.

Insulation, wind rating and openings that aren't standard

An insulated sectional door makes a real difference in a garage that's been converted to a workshop, a gym or a home office, and it cuts the drumming noise from summer rain. It costs more per square metre, so it's worth deciding early rather than after the door is ordered.

Exposed and coastal locations should be built to the wind rating for the site. If your garage faces open water or a clear paddock, say so at the quote stage and the door is specified accordingly. Oversized openings, sloping floors, low lintels and double-width garages with a centre post removed all change the build — none of them are a problem, but they all need measuring before a price means anything.

What a new door costs

Doors are quoted per opening, because size, material, finish and wind rating all move the number. What is fixed is the motor: a new premium opener supplied and installed is $800 – $880. Repairs to an existing door sit at $180 – $250 for a service and repair, and $320 – $495 for spring replacement. All prices include GST and are confirmed with you before any work starts.

How we work

You ring or text, we come out and measure the opening, check the headroom, side room and floor level, and give you a written quote. Once you accept, the door goes on order — standard colours are quicker, special orders take longer. When it lands we book a fit time that suits you, install the door and opener, balance the springs, test the safety reverse, and take the old door away.

Impact Doors is a local owner-operated business with more than ten years on the tools and a 5.0 rating from 152 Google reviews. The phone is answered 24 hours.

The branded Impact Doors ute with its signwritten tray visible, parked in front of a new white sectional garage door.
A real Impact Doors job — no stock photos.

Confirmed prices

  • Service and repair

    $180 – $250

    Most common call-out. Covers diagnosis and the repair on the spot.

  • Spring replacement

    $320 – $495

    The most common failure on a garage door. Price depends on door size and spring type.

  • New premium motor

    $800 – $880

    Supplied, installed and serviced. Merlin, B&D and other major brands.

Prices include GST and are confirmed with you before any work starts.

What's included

  • Sectional, roller and tilt doors
  • Colorbond, powder-coat and timber-look finishes
  • Galvanised hardware for coastal suburbs
  • Free on-site measure and quote
  • Opener supplied and programmed with the door
  • Old door removed and taken away

Frequently Asked Questions

Which garage door type should I choose?
It's usually decided by your opening. Sectional panel doors suit most modern garages with headroom above the opening, roller doors suit low-headroom garages and sheds, and tilt doors suit older single garages where the driveway has room for the door to swing out. We measure and tell you which will fit before you pick a colour.
How much does a new garage door cost?
Doors are quoted per opening because size, material, finish and wind rating all change the price, so we measure first and give you a written figure. A new premium opener supplied and installed is $800 – $880 including GST.
Do I need a cyclone or wind-rated door?
If your garage faces open water, an unbroken paddock or a long clear approach, it should be built to the wind rating for the site. Tell us at the quote stage and the door is specified for it.
Can I get a timber look without timber maintenance?
Yes. Woodgrain finishes on a steel door give the appearance of timber and don't need oiling or sanding, which is worth having in Queensland's sun and storm cycle.
Do you take the old door away?
Yes — removal and disposal of the old door is included in every installation quote.

Related pages

Call NowGet a quote